Automatic Lubrication Systems

increase equipment uptime      

When choosing an automatic lubrication system, it is important to consider factors such as the type of equipment being lubricated, the operating conditions, and the lubricant type and viscosity. Proper installation, maintenance, and monitoring of the system are also critical to ensure optimal performance and maximum equipment life.


Automatic Lubrication Systems


Developed to be more powerful than the original ELECTRO-LUBER™, the ULTIMATE-LUBER™ is a motor-driven automatic lubricator which is refillable using standard grease guns.

This strength of the ULTIMATE-LUBER™ allows it to perform multi-point lubrication and drive lubricant through long feed lines to progressive distributors. When a dispensing cycle is selected, the units will activate at programmed intervals.

At each interval, the ULTIMATE-LUBER™ dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the lubricant output.

SIZE OPTIONS: Model 60, Model 125, Model 250, and Model 500

Using our powerful MD unit and a distribution block, cutting costs has never been easier. Our ULTIMATE units make machinery maintenance easier, cheaper, and safer!


The classic ELECTRO-LUBER™ series is the most reliable automatic lubrication unit on the market.

A.T.S. Electro-Lube developed the original ELECTRO-LUBER™ in 1982, and was the first company to use this self-contained auto luber technology and set the industry standard.

SIZE OPTIONS: Jumbo, Budget, Mini, and Micro

The ELECTROCHEMICAL series can be filled with any lubricant and used in virtually every work environment.

These lubers are intrinsically safe and approved for all explosive areas. They are also certified by MSHA for use in mines. They can be filled with food-safe lubricant and will work underwater up to 30′ (10m) deep!

Our units are simple to use, effective, and drastically reduce the risk of bearing failure by ensuring that your machines are continuously lubricated with the right amount of lubricant at the correct time.


The JACK LUBER™ is the most versatile automatic lubrication system in the A.T.S. product line. Our electromechanical lubrication system is tough, reliable, and easy to manage.

We took all of the most popular features from each of our luber series and incorporated them into one unit. We took the cold-temperature ability from our ELECTRO-LUBER™ series, the raw power of the motor from the ULTIMATE™ series, and the convenient replaceable cartridge idea from our TITAN™ series—but added in a few bonuses on the way:

Our JACK LUBER™ comes with a unique JACKSCREW mechanism to ensure that our JACK works in seriously cold temperatures, plus we made it our most affordable motor-driven unit yet! This mid-price range lubricator is truly the “Jack” of all trades.

SIZE OPTIONS: Model 125 and Model 250

JACK LUBER™ saves time, money and gives the performance you need!
Упровадження сайтів в Україні: SEO-NEWS - Ваш Партнер для Онлайн Успіху


The TITAN Cartridge Luber™ is a powerful, motor-driven, automatic lubricator which is built on our proven ULTIMATE LUBER™ technology.

The TITAN CL™ is refillable by replacing the standard grease cartridge. These units allow you to be maintenance free for up to 2 years, and for added convenience we have built in low-level sensors that alert the user when the lubricant is near empty. When the grease cartridge needs to be replaced, doing so takes only seconds.

With our entire line of automatic lubrication products, you minimize risk to employees, there’s no downtime, no costly repairs from improper lubrication, and the unit itself tells you when you need to replace the cartridge. It’s that simple!


The TITAN II LUBER™ has the same features as the TITAN CL™ except that it has twice the capacity.

See TITAN Oiler 2000 to handle all oil lubricant needs.


A.T.S. Electro-Lube’s TITAN OILER™ is the world’s most powerful single- or multi-point automatic oiler.

The TITAN OILER™ is a motor-driven lubricator, built on our proven ULTIMATE LUBER™ technology, and is perfect for most industrial oil lubrication applications where quality and reliability are needed.

With unrivalled power, the TITAN OILER™ dispenses lubricant at up to 2000 psi. This unbeatable pressure means that you can run extremely long lubrication lines and remote mount the unit 180 feet (60m) from the lube point. This is incredibly convenient, especially in terms of safety, for hazardous or hard to reach areas.

Alternatively, you can use an oil distribution system to feed 12 application points with one unit.

As always, neither temperature nor altitude will affect the output of our units.

The TITAN OILER™ can be used with any of our remote power and remote control options.

Упровадження сайтів в Україні: SEO-NEWS - Ваш Партнер для Онлайн Успіху


our contact

Get in Touch with Us

We welcome your comments, feedback, and inquiries. Whether you have a question about our products, services, or just want to say hello, we'd love to hear from you.


enquiry form

Thank you for visiting our website.

If you wish to find out more about our product, kindly fill up the following enquiry form and press the submit button.

We will reply your enquiry shortly.

Thank you.

Agent Wanted

MSD Lubricants (M) Sdn Bhd is looking for distributor in Malaysia as well as the South East Asia region.

For further queries, kindly contact Ms Melinda Lee at +603 - 3165 6228 or email us at


navigation links


( formerly known as Boelube (M) Sdn Bhd )

© all rights reserved. developed by lagenz success

developed by lagenz success